Duracell POWERPACK300 Guia de Resolução de Problemas descarregar pdf (Página 42)

Recharging the Duracell® Powerpack Battery

Recharging the Duracell® Powerpack

Battery

To check the Duracell® Powerpack’s charge level, press the

Battery Level button.

You can recharge the battery using:

• the fully automatic “plug-in-and-forget” AC charger.

• the DC charging cable to recharge from your vehicle as

you drive.

• a generator equipped with a regulated 12 V battery

charging outlet.

• a solar panel.

Recharging with the AC Charger

Recharging with the AC charger is a true “plug-in-and-

forget” charging method.

To recharge with the AC charger:

1. Disconnect any 12 V DC appliances from the DC power

outlets.

2. Disconnect any AC products from the Duracell®

Powerpack and turn the AC Power

ON/OFF switch to OFF.

3. Insert the AC charger cable end into the AC charger input

socket located under the red jump-starting clamp.

Note: The Duracell® Powerpack Battery Level LEDs are only

accurate when the Duracell® Powerpack has been disconnected

from all appliances and all charging sources for 15 minutes.

CAUTION

Do not operate AC or DC appliances with the Duracell®

Powerpack while the Duracell® Powerpack is being recharged

with the AC charger.

The AC charger may be permanently damaged if AC appliances or

12 V DC appliances are operated while the AC charger is

connected.

Duracell_PP_300_PlusEP.book Page 29 Wednesday, June 13, 2007 4:02 PM

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 62 63

Sem comentários

Duracell POWERPACK300 Guia de Resolução de Problemas Página 42